Solid
plastic shower dividers are configured much like toilet stalls. Two partitions stand on either side of
an individual wall-mounted or corner mounted shower. XPB Locker customers can choose to have
either a door or a shower curtain stalled in the front of the shower
stalls. Solid plastic is the
recommended material for building individual shower units because it is water
resistant, vandal resistant, and features a contiguous color throughout the
plastic mold that never loses its finish and never requires
repainting.
Bradley Bradmar solid
plastic partitions can be installed in shower rooms, locker facilities, or
in restrooms. We recommend a
floor mounted, overhead braced configuration for maximum stability and
privacy. These shower stalls can be
configured in a number of layouts to accommodate the dimensions of any floor
plan. Common layouts include, but
are not limited to, corner, wall-to-wall, and freestanding.
XPB Locker solid
plastic shower dividers are unique in the industry. Panels and doors measure 72” in
height. This creates optimal
privacy and is far more preferable to the industry standard measurements for
panels and doors, which default at 55" H and leave a disturbing gap of 12" from
the floor. Supporting pilasters are
offered at 82" with overhead bracing. Users find this much more
comfortable than the industry standard alternative which simply does not provide
enough of a comfortable enclosure for individual showering.
Individual showers within the stalls
feature a variety of wall-mounted lines by Bradley Corporation.
These include built-in individual wall showers with concealed supplies,
individual flush mounted wall showers, corner mounted individual wall showers,
barrier free corner wall showers, Adapt-Brad individual renovation shower (which
is ideal for any restroom remodeling project), ADA compliant coverall wall
showers, standard individual coverall wall showers, ADA compliant individual pivoting wall showers, and
standard individual pivoting wall showers.
Solid plastic shower
dividers are mounted to the floor and the walls by pilasters with
stainless steel shoes.
Customers can choose to have all partition hardware upgraded to either
all aluminum or all stainless steel.
Stainless steel is recommended for environments that not only have to be
kept ultra clean, but also have to look superbly attractive even during periods
of heavy use.
Privacy options include either a shower
curtain which spans the length of the front of the stall, or a solid plastic
door uniquely sized and fitted to panels with continuous channel
brackets. This closes the door
with no site gaps into the interior of the stall. Shower curtains are obviously a more
cost effective way to configure your shower room. However, in facilities where
expectations of both aesthetics and user privacy run high, we recommend that
contractors install doors in solid plastic shower dividers.
To save you valuable time, XPB Locker will help you
determine a layout that will make the best use of space in your particular
facility. Simply fax or email
us a floor plan of the room. Also,
let us know what other fixtures you intend to install so we can help you find
the best location for your shower stalls in relation to other fixtures and
accessories such as benches, toilet stalls, lavatories,
wash
fountains, and commercial washroom Division 10
accessories.
XPB
Lockers & Supply carries
a wide variety of Commercial Lavatories, Commercial Outdoor Furnishings, Storage Lockers,
Bleachers,Commercial Mailboxes
and deliver nationwide. If you can not find what you are
looking for call us toll free at
1-877-483-9270 and we
will find it for you. Our home office is located in New Braunfels, Texas with
distributors located in all 50 States including Houston, TX, New York NY, Los
Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX., and
Austin, TX.
|