Toilet Partitions for Factory Restroom Design

Toilet partitions for factory restroom design must offer corrosion resistance, ease of maintenance, and multiple options in mount configurations to ensure a return on investment for the organization that procures them. .

Toilet dividers for factory restroom design need to be corrosion resistant to minimize replacement costs in heavily polluted areas and for organizations specializing in the manufacture of fuels and certain chemicals. The best commercial bathroom dividers to use in both environments are solid plastic, baked enamel, and stainless steel, depending on how much money you want to spend.

Baked enamel is the least expensive, but it is not vandal resistant like plastic or stainless steel. Also, it requires a bit more extra care in cleaning which we will look at in a minute.

Obviously plastic, which lasts a thousand years even when thrown away, is not going to rust, nor is stainless steel, which is designed to resist rust and chemical airborne corrosives. While more expensive, stainless steel and solid plastic are tougher and ensure a solid ROI for those who can afford the front end purchase costs.

Regardless of your choice in partition material, all three toilet partition options that we recommend for factory restroom design are very low maintenance when you follow the basic guidelines for care.

To begin with, stainless steel is very hard to scratch and takes a lot of force to dent. However, there is one thing that will destroy it, and that is anything acidic that can eat through metal. Never let your cleaning crew put anything on a stainless steel partition that has an acid based composition.

For solid plastic toilet partitions, the cardinal rule is to never use any kind of heavy duty scouring pad that will leave visible grooves in the plastic. You can, however, use a soft bristle brush to remove buildup of dirt, grime, and grease. If someone vandalizes the partition by scratching it, you can also apply a heat source from 6 inches away and smooth the plastic back together. However, you have to be careful with this because melting the plastic will warp it.

Baked enamel toilet partitions require the most attentive care of any used in factory restroom design. This does not mean they are delicate, per se, but they cannot be scrubbed with force, nor can they take exposure to strong chemicals. Clean baked enamel with lukewarm soap and water in one bucket and clear water in another bucket. Let the soap do most of the work, then wipe the soap off with a soft rag. Rinse the surface, and wipe off the clear water to keep water spots from forming.

Toilet partitions may need to be mounted from the floor or the ceiling depending on what a particular factory restroom design calls for. Ask XBP Locker Supply help you find the right mounting option for your particular floor plan.

XPB Lockers carries a wide variety commercial industrial sinks, commercial mailboxes, commercial outdoor furniture, bleachers, andcommercial signage delivered nationwide. If you can not find what you are looking for call us toll free at 1-877-483-9270 and we will find it for you. Our home office is located in New Braunfels, Texas with warehouses located throughout the United States that enable us to service all 50 states including New Orleans, La., Cleveland, Ohio, Kansas City, Mo., Mesa, Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami, Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado, Houston, TX, Arlington, Texas, Beaumont, Texas, Denton, TX, McKinney, Texas, Midland, TX, Killeen, Texas, ALBQ, NYC, LA, MPLS.