What material do you recommend shower stalls be manufactured from?

We recommend Bradley Bradmar solid plastic as the preferred material for pilasters, partition panels, and doors (if applicable).  The reason for this is simple.  Solid plastic shower dividers are every bit as moisture resistant as stainless steel, but they require less specialized care.  They are actually much harder to deface than stainless steel, and much less expensive and easier to repair in the event that they are damaged.  Another key feature is contiguous color that runs throughout the plastic, eliminating the need for painting or repainting at any time.

What mounting configuration do you recommend?

We recommend installing your solid plastic shower dividers in a floor mounted overhead braced configuration.  This creates maximum stability and privacy for shower users.  Pilaster feet are stainless steel.  You can choose upgrade to all aluminum or all stainless steel partition hardware depending on the design requirements of your particular bathroom, shower room, or locker room.

Do you have individual showers for remodels?

Yes.  You can install Adapt-Brad individual renovation showers inside your shower stalls if you are doing a commercial restroom remodel.  We also carry a full line of individual wall mounted and corner mounted showers that can be installed in any new construction and many remodels as well.  Call to see which shower assembly will work best with your particular user requirements.  ADA models are available as well.

What layouts can solid plastic shower dividers be installed in?

Basically you can install them in any layout you normally would install toilet partitions.  Pilasters and panels can be configured for corners, alcoves, wall-to-wall, or they can be installed free standing.  If you want to save time deciding which layout is best, or whether you may need multiple layouts, ask XPB Locker to include a free design drawing with your quote.  We need simply a floor plan of your facility faxed or emailed to us to provide you with this convenient, time-saving courtesy.

What level of privacy can users expect from your solid plastic shower dividers?

Our shower stalls offer optimal privacy because panels and doors can be ordered in 72 inch heights.  This offers a far more protected enclosure than the industry standard height of 55 inches, which leaves a 12 inch gap under the stall.  You can enclose the front of the stall with an optional shower curtain (to save on installation costs), or a solid plastic door that closes against the panel with a zero site line into the interior.  If privacy is a major consideration in your facility, we strongly recommend you build your shower stalls with doors.

XPB Lockers & Supply carries a wide variety of Commercial Lavatories, Commercial Outdoor Furnishings, Storage Lockers, Bleachers,Commercial Mailboxes and deliver nationwide. If you can not find what you are looking for call us toll free at 1-877-483-9270 begin_of_the_skype_highlighting 1-877-483-9270 end_of_the_skype_highlighting and we will find it for you. Our home office is located in New Braunfels, Texas with distributors located in all 50 States including Houston, TX, New York NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio, TX., and Austin, TX.